ValueTRUE? 行星減速機
ValueTRUE?是低成本、螺旋鼓齒式True Planetary減速機。 內部齒輪直接切入不銹鋼輸出外殼鑄件，增加了扭矩能力，同時并不增加成本。 螺旋切齒輪與直齒輪相比，可提供更高的扭矩能力、精確性與剛度。 這種技術使得Thomson Micron能以更經濟的價格提供高性能的螺旋鼓齒式行星減速機。
產品介紹
技術規格：
| 隨時立即發貨 | ||
|---|---|---|
| 安裝類型 | 內聯 | 直角 |
| 精度 | 4弧分 | 4弧分 |
| 機架尺寸 mm | 60, 75, 90, 100, 115, 140, 180, 220 | 60, 75, 90, 100, 115, 140, 180 |
| 轉矩承載能力 Nm (lb-ft) |
最大 2969 (2190) | 最大 2800 (2065) |
| 可用比例 | 4:1, 5:1, 7:1, 10:1, 16:1, 20:1,25:1,28:1, 35:1, 40:1, 50:1, 70:1, 100:1 | 8:1, 10:1, 12:1, 14:1, 15:1, 16:1, 20:1, 25:1, 28:1, 30:1, 35:1, 40:1, 50:1 |
| 徑向承載能力 N (lbf) |
最大 37910 (8523) | 最大 37910 (8523) |
| 安裝系統 | RediMount? | RediMount? |
ValueTRUE? 亮點
- 低成本—比常見市場價格低30%
- 螺旋鼓齒式True Planetary減速機較之非螺旋齒輪減速機，提高了負載緊湊度，齒隙更低，運行更平滑、安靜。
- 兼容RediMount—安裝到任何電機只需簡單三步： 對準，安裝，并緊。
- 即插即用，是大多數通用螺旋齒輪減速機的經濟型替代產品
- 不銹鋼輸出外殼，極其堅固耐用，適合用于環境敏感性應用。
視頻：Thomson離合器、電磁制動器和減速機技術
Thomson 電磁制動器/離合器產品線經理John Pieri介紹了摩擦式離合器和扭簧式離合器及其作為工業解決方案的各種應用。他還介紹了在某些特定場合下摩擦式離合器的使用方法和時間以及在其它場合下 扭簧式離合器的使用方法和時間。他還對減速機進行了介紹，并講解了減速機在應用設計方面的作用。
產品資料
手冊
| Micron Guide Selection Guide | 257 KB | |
| Micron MOTIONEERING® | 347 KB | |
| TRUE Planetary? 減速機 | 1505 KB | |
| True Planetary? Gearheads | 1577 KB | |
| True Planetary? Gearheads | 917 KB |
產品目錄
| True? Planetary Gearheads | 7421 KB | |
| True Planetary? Gearheads | 7699 KB | |
| True Planetary? Gearheads | 6956 KB | |
| True Planetary? Gearheads | 12081 KB | |
| True Planetary? Gearheads | 8034 KB |
手冊
| TRUE Planetary? Gearheads | 430 KB |
產品選型
Not finding the right gearhead for your needs? Visit Micron Motioneering, our full-featured sizing tool!
Family
Backlash
Peak Torque
Nm — Nm
ft-lb — ft-lb
Angle
Frame Size
Slim Line
Ratio
Gearing
Duty Cycle
Output Shaft: Single, Dual or Hollow
Redimount
Select other checkboxes to view available options
比較
3D 模型
Family
- ValueTRUE (VT) - Helical Crowned Gearing
- UltraTRUE (UT) - Helical Crowned Gearing
- XTRUE (XT) - Spur Gearing
- DuraTRUE (DT) - Spur Gearing
- EverTRUE (ET) - Continuous Duty, Spur Gearing
- AquaTRUE (AQT) - Stainless Steel Construction, IP66, IP67 and IP69K Protection. Perfect for washdown applications, Spur Gearing.
Frame Size
Roughly the width of the gear head.
Ratio
Input speed vs. output speed
Output Shaft: Single, Dual or Hollow
- Single - One solid output shaft
- Dual - Two solid output shafts. Only available on right angle units
- Hollow - Gearbox has a through bore for clamping onto a shaft. Only available on right angle units.
Angle
- Inline - Motor and output shaft will be in-line with each other
- Right Angle - Motor will be at a 90 degree angle from the output
Backlash
Backlash, sometimes called lash or play, is lost motion caused by space between the gear teeth.
Gearing
Helical gears are known for their quiet and smooth operation along with their ability to transmit higher loads than spur gears.
Peak Torque
Allowable momentary peak torque for emergency stop or heavy shock loading.
Duty Cycle
Continuous Duty - Able to run non-stop
Redimount
The RediMount is the adapter that goes between the Motor and the Gearhead. Different RediMount numbers have different dimensions. If you need assistance in selecting a RediMount to fit your motor contact customer support or visit Micromotioneering for assistance.
All Micron gearheads use the innovative RediMount? system, the most flexible mounting system available today. This mounting system allows easy and error free mounting to any motor on the market in just three easy steps - simply align, mount and tighten.
Slim Line
More compact version.